Ferrogard -903 plus

Ferrogard -903 plus

A surface-applied mixed corrosion inhibitor, designed for use as impregnation of steel-reinforced concrete.
Select your options
Size
Details
Last Updated 16 March 2023

Further information

Usage

  • For the corrosion protection of steel reinforced concrete structures above and below the ground
  • As a corrosion control treatment for undamaged reinforced concrete where reinforcing steel is corroding, or is at risk from corrosion due to the effects of carbonated or chloride contaminated concrete
  • Sika® FerroGard®-903 Plus is especially suitable for extending the service life of aesthetically valuable fair-faced concrete surfaces such as historic structures

Advantages

  • Suitable for method 11.3 (applying inhibitor to the concrete) defined by EN 1504-9 for Principle 11 (anodic control)
  • Does not change the appearance of the concrete structure
  • Does not alter the water vapour diffusion properties of concrete
  • Long term protection and durability
  • Can be applied to the surface of existing repairs and to surrounding areas to prevent the development of incipient anodes
  • Protects both, cathodic (principle 9) and anodic (principle 11) zones of reinforcing steel
  • Can be applied where other repair/prevention options are not viable
  • Economic extension of the service life of reinforced concrete structures
  • Easy, economical application, renewable
  • Comply with GHS/CLP regulation
  • Can be used as part of a simple yet effective concrete repair and protection system
  • Penetration depth can be tested on site using the Sika “Qualitative Analysis Test” - refer to your local Technical Service Department for details
Weight20kg
Product TitleSika FerroGard -903 Plus
ColourTransparent liquid, colourless to slightly yellowish
CompositionAqueous solution of amino alcohols and salts of amino alcohols
Density~1.05 (+20 °C)
pH-Value~10
Viscosity~20 mPa.s s (Brookfield RVT, spindle 2, 100 rpm, 23 °C)

Enquire about this item

Enquire via Email

Contact supplier

Liener Investments image
Liener Investments
Waterproofing and floor finishing products
Lusaka
Liener Investments is an official distributor of Sika, Alcolin and Verni waterproofing, reinforcing, flooring and epoxy art (resin kits, pigments and powders) supplies in Zambia. By using Liener’s range of products, you are guaranteed of water tight and leak free results. They will stop water penetrating through your roof, preventing costly water damage to your building.