Cold Glue - Wood Glue

A high-grade multipurpose polyvinyl acetate-based adhesive that is Ideal for furniture assembly, wood model building, craftwork and photo mounting

Select your options

Size

Details

Last updated 06 Oct 2022

Further information

Benefits

High strength - final bond stronger than wood
Long open time - long assembly time
Versatile - bonds to a variety of porous substrates
Low VOC - non-toxic, non-flammable (wet state)
Water-based formulation - cleans up easily with water

Applications

Ideal for interior furniture assembly, model building, craftwork and photo mounting
Suitable for edge glueing, face glueing, laminating and veneering applications

Limitations

Alcolin COLD GLUE is not intended for exterior use or where moisture is likely. For exterior applications usesALCOLIN ULTRA WOOD GLUE OR ALCOLIN WATERPROOF GLUE. If ALCOLIN COLD GLUE is to be used outdoors, or if it will be exposed to the elements, the joints should be covered with paint or varnish once the adhesive has dried. Should not be used to adhere coated woods, synthetic woods and melamine. Not suitable for structural or load-bearing applications, or where gap-filling properties are required. Do not use when temperature, glue or materials are below 4°C. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion

Cleaning

Tools can be cleaned with water

Weight	0.13kg
Product Title	Alcolin Cold Glue - Wood Glue
Type	Polyvinyl acetate adhesive
Appearance	Viscous white liquid, drying to a translucent white glue line
Density	1.06g/cm³
MFFT	4°C
pH	6.3
Solids	38%
Viscosity	13000cps (#5, 20rpm, 23°C)
Minimum Application Temperature	4°C
Spread Rate for assembly	200 – 250g/m²
Spread Rate for laminating	150 – 200/m²
Spread Rate for veneering	100 – 150g/m²
Assembly Time (20°C at 65% RH; 150g/m² )	10 minutes Open ( 10 minutes Closed)
Press Time (20°C at 65% RH; 150g/m² )	Unstressed Joints : 60 minutes to 4 hours
Press Temperature	Room Temperature to 110°C
Press Pressure	Soft Woods: 7 – 10 Bar (Medium Woods: 9 – 12 Bar)
Glue line	Meets SANS 10183:2009 D2 standard
Tensile strength (wood failure)	7.3N/mm² (65%) – beech wood, 2hrs clamping; 24hrs condition
Service temperature range	-5°C to + 60°C

Weight

0.13kg

Product Title

Alcolin Cold Glue - Wood Glue

Type

Polyvinyl acetate adhesive

Appearance

Viscous white liquid, drying to a translucent white glue line

Density

1.06g/cm³

MFFT

4°C

6.3

Solids

38%

Viscosity

13000cps (#5, 20rpm, 23°C)

Minimum Application Temperature

4°C

Spread Rate for assembly

200 – 250g/m²

Spread Rate for laminating

150 – 200/m²

Spread Rate for veneering

100 – 150g/m²

Assembly Time (20°C at 65% RH; 150g/m² )

10 minutes Open ( 10 minutes Closed)

Press Time (20°C at 65% RH; 150g/m² )

Unstressed Joints : 60 minutes to 4 hours

Press Temperature

Room Temperature to 110°C

Press Pressure

Soft Woods: 7 – 10 Bar (Medium Woods: 9 – 12 Bar)

Glue line

Meets SANS 10183:2009 D2 standard

Tensile strength (wood failure)

7.3N/mm² (65%) – beech wood, 2hrs clamping; 24hrs condition

Service temperature range

-5°C to + 60°C

Enquire about this item

Enquire via Email

Contact supplier

Pafriw Hardware

General hardware

Lusaka

Count on Pafriw Hardware for high-quality safes and cash-boxes, electronic security and alarms, padlocks, cables, brackets, furniture and floor protection, springs, hooks, picture hanging, tie-down and load restrains, chains, ropes, rigging, wheels and castors as well as child safety and fire safety equipment.