Products Borehole submersible pumps

Finecop Zambia distributes Tormac stainless steel (TS Series) and cast iron submersible pumps (TB,TP and TV Series). Stainless steel submersible pumps distributed are available in 4'', 6'', 8'' and 10'' dimensions.

Cast iron submersible pumps are available in TB Series (6'' and 8'') and 4'' (TP and TV Series). Tormac pumps are designed to deliver the best possible hydraulic efficiency. The pumps are multi-stage single-suction centrifugal type pumps provided with an integral check-valve and NEMA standard coupling.

The integral check valve prevents water from flowing back and reduces the risk of water hammer which paves the way for trouble-free performance. The suction screen is designed to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles. The stainless steel construction of these pumps not only prevents corrosion but also exceptionally increases their life-span.

Submersible motors

Finecop Zambia distributes resin filled (Esteem series), water-filled (Eco series) and oil-filled (Elegant series) submersible motors. Produced in accordance with ISO 9001 standard and with NEMA standard mounting dimensions, Tormac submersible motors are developed using latest engineering software, high – tech types of machinery and tools.

The electrical conditions such as voltage, frequency, and operating conditions are taken into account by designing the winding and cooling system. The stators of the motors are wound with high quality enameled copper wire and the shell is filled diligently with epoxy resin. The resin in the motor allows faster and greater heat dissipation to ensure longer motor life.

The integral thermal protector and lightning arrester protect the single-phase motor from winding burnouts. Deionized water mixed with propylene glycol in proper ratio serves as a lubricant for the rotor, bushes, and thrust bearing as well as coolant media of the motor.

Esteem series motors

Available in 4″ dimensions, the Esteem series of motors are provided with replaceable cable lead-outs with an integrated earthing system and watertight connector. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength and durability. All single phase three wire motors are supplied with suitable control boxes.

Eco series motors

These are squirrel cage, water-filled and water-cooled rewindable type of motors, available in 4″, 6″ and 8″ dimensions. The motors are pre-filled with deionized water which acts as a lubricant and coolant. The winding of these two-pole motors is made of a special waterproof wire of pure electrolytic copper insulated with synthetic film or thermoplastic material.

All single-phase motors are fitted with a thermal protector to avoid winding burnouts. The stator shell, housing shell, and motor base are made of fabricated S.S. 304 / 316 which prevents the motor from corrosion.

Elegant series motors

These are 4'' oil-filled submersible motors designed to operate in 4″ and larger boreholes. The motors have a special stator designed for high starting torque. The casing, shaft, upper cover and bottom end are made of stainless steel stators designed for high efficiency and the ability to operate within wider voltage fluctuations. Voltage, frequency and operating conditions are taken into account in designing the winding and cooling system.

Multi-stage centrifugal pumps

Finecop distributes Tormac vertical multistage (TV Series) and horizontal multi-stage mono-block pumps (TH Series). These pumps are powered by a totally enclosed fan cooled, A.C. induction motor, suitable for continuous duty. The stator of the pump is made of low watt loss steel laminations with a balanced rotor to ensure vibration and noise-free operations. The shaft of the pump is made of quality steel and precisely ground to transmit the rated horsepower.

Vertical multi-stage mono-block pumps

These are non-self priming, axial suction and delivery pumps available with different port connection options – NEMA standard round flange, NEMA standard oval flanges, and flanges suitable for PJE coupling. All wetted components like impellers, diffusers, and shafts are made of stainless steel to prevent corrosion. They are designed to deliver the best possible hydraulic efficiency. With the stage castings, impellers shaft and delivery brackets made of high-grade stainless steel, these pumps can be used to pump high-pressure water and hygienic to use in drinking water systems.

The pumps are equipped with 'O' rings and gaskets to prevent leakage at the intermediate casing during high pressure. The pumps also have a mechanical seal made of ceramic and carbon graphite to ensure reliability. The replacement of the mechanical seal can be done as the installed position without removing the pump from the booster unit. These pumps are reliable, easily serviceable and used in water-boosting units to get trouble-free service for years together.

Horizontal multi-stage mono-block pumps

This is a non-self-priming, axial suction and vertical radial delivery type of pump. with threaded ports. The vital components – impellers, diffusers, and shaft – used in these pumps are made of high-quality stainless steel which prevents corrosion and ensures smooth and trouble-free performance.

Sewage and drainage pumps

Finecop also distributes Tormac sewage pumps (TSM Series) and drainage pumps (TDS Series). The TSM and TDS series is an extremely versatile submersible pump for stationary and portable use. Sewerage wastewater pumps are built to exacting specifications to ensure durability and easy maintenance.

The pump and motor are connected with a single drive shaft to eliminate any transmission loss. Wear-resistant ball bearings ensure better hydraulic efficiency and noiseless operation, whereas pump casing and brackets are made of high quality cast iron.

Centrifugal and peripheral pumps Centrifugal pumps

Centrifugal pumps have an axial suction port and radial discharge part with a back pull-out design. The components of the pumps such as seals and ball bearings are made of quality raw materials to ensure a long life.

Peripheral pumps

These pumps are manufactured using state-of-art machinery in a production accredited with ISO 9001 certification. The pump and motor portions are made of quality materials not only to ensure trouble-free operations and longevity but also to enable optimum performance in hydraulic efficiency.

Accessories uPVC riser pipes

Finecop distributes Tormac uPVC riser pipes that are specially designed for borehole submersible pumps. These pipes can be fixed with pumps having both BSP and NPT standard outlets. uPVC riser pipes are available in different classes which can be selected based on the installation depth and recommended head and load withstanding capacities.

These pipes are anti-corrosive in nature and formulated with edible grade materials and are highly recommended for installations, where the interest of hygiene is more.

Submersible cables

These cables are used to supply power to submersible pump sets. They are multi-strand, multicore cables that are in three or four core versions. The cables come in two types – flat or round. These cables are ideal for installations in dry, moist and wet environments but however not suitable for explosive environments.

Control box and panels

These products are specially designed to facilitate complete protection for pump sets against faulty current and voltage. The panels are designed to monitor and protect the motors against, overloads, phase failure and unbalance, dry run protection, short circuit and surge current.

Applications

Submersible pumps